|
Rust & Dust |
|||
 $4600 |
Boss & Co. 12 ga Hammer Damascus (does not have butt stock or trigger guard) A fantastic gunsmithing challenge! Rust & Dust 12 gauge |
3025 2634 |
|
| Beautiful Damascus and finely engraved, (missing firing pins, Top tang screw, trigger guard and butt stock). Forend appears to be a good replacement and operates perfectly. This would be a super and rewarding project for the upper level gunsmith. | |||
|
Click anywhere on the large image below to zoom in, or use the
zooming slider below the image. |
Full Screen
|
|||
|
Hammer No Damascus 30" 2 1/2" black powder proof Cyl. Cyl. .032 .027 No |
|||
|
$1500 |
J.P. Sauer Grade 17 - A worthy project gun .... Rust & Dust 12 gauge |
2333 117074 |
|
| Medium deep pitting in both bores. One significant dent in the right barrel 4 3/4" from the muzzle on the right barrel. Gun is off face and needs rejoining. Chequering is gone in places, would need full re-cut in a restoration. Keep in mind this is a true Prussian round top Sauer and it features the long action table. Good news is that the barrels will probably clean up with a back boring as they have excellent thick walls. | |||
|
Click anywhere on the large image below to zoom in, or use the
zooming slider below the image. |
Full Screen
|
|||
|
Boxlock ejector Yes Steel 30" 2 3/4" pre 1911 so no nitro pro0of .024 full .026 Full .042 .041
15" over extension and pad, 13 1/4" wood
1 1/2" 2 7/16" 1/8" 7 lbs. 11 oz. Yes |
|||
|
$1300 |
F Dumoulin Liege sidelock Rust & Dust 12 gauge |
1986 79611 |
|
| Bright bores and great walls make this gun a worthy project. The gun is tight on face. | |||
|
Click anywhere on the large image below to zoom in, or use the
zooming slider below the image. |
Full Screen
|
|||
|
Sidelock No Damascus 30" 2 3/4" .020 full .004 Skeet (near Cyl.) .040 .038
14 1/4"
1 3/4" 2 3/4" 3/16" 6 lbs. 14 oz. No |
|||
|
$800 |
Manufrance "Ideal" grade "2R" in need of restoration but with solid barrels Rust & Dust 12 gauge |
2387 44825 |
|
| This has been rather amateur stocked at least in the butt. The hidden sling is missing and needs a butt plate or pad. The barrels show some pitting but I believe would clean up as you could remove .005 from each and they should be clean. The top two tang screws need replacing. This was a project I never got too and worthy . I am open to trades.:) | |||
|
Click anywhere on the large image below to zoom in, or use the
zooming slider below the image. |
Full Screen
|
|||
|
trigger plate No Steel 25 1/2 "(65 cm) 2 1/2" .035 extra full .022 Mod towards full .032 .030
14 1/8"
1 5/8" 2 3/4" 1/16" 5 lbs. 15 oz. Yes |
|||
|
$700 |
J. Hollis of England Rust & Dust 12 gauge |
2344 31928 |
|
| Nice Damascus brown on these barrels. The wrist has been well repaired with epoxy and seems very strong. A little checkering and cosmetics could make this a nice looking gun. The bores are fairly bright with a light frost but have numerous dings and one dent that should be removed. | |||
|
Click anywhere on the large image below to zoom in, or use the
zooming slider below the image. |
Full Screen
|
|||
|
Sidelock No Damascus 30" 2 1/2" .024 full .003 Near cyl. .030 .030
14 1/16"
1 7/8" 2 13/16" 3/16" 7 lbs. 3 oz. No |
|||
|
$675 |
Francotte "The Knockabout Gun" retailed by Von Lengerke & Detmold of New York Rust & Dust 12 gauge |
2671 61396 |
|
| A solid boxlock and very well made but in need of a rejoin. We can arrange this for $300.00. There are a couple of small dings forward in the right barrel and one removed one in the left. I have had these guns apart and am always impressed in how high quality and hand fitted and polished the mechanics are. | |||
|
Click anywhere on the large image below to zoom in, or use the
zooming slider below the image. |
Full Screen
|
|||
|
Boxlock No Steel 30" .031 full .010 IC .036 .033
14 1/4" (13 1/4" original wood)
1 3/4" 2 9/16" 1/8" 7 lbs. 5.5 oz. Yes |
|||
|
$600 |
Remington 12g. model 1900 double in good condition Rust & Dust 12 gauge |
2444 333100 |
|
| Ever so slightly off face but usable as is. Stock is sound but with some minor repairs. Some light pitting but plenty of wall thickness. I detect a very repairable crack (not through) in the wrist which should be attended to soon. | |||
|
Click anywhere on the large image below to zoom in, or use the
zooming slider below the image. |
Full Screen
|
|||
|
boxlock No Steel 30" 2 5/8" chamber .023 light full .023 light full .026 .038
14 1/8
1 3/4 2 3/16 0 7# 9 1/2 oz Yes |
|||
|
$1200 |
W.C. Scott 16ga. boxlock with nice Damascus Rust & Dust 16 gauge |
2607 70611 |
|
| A nice little 16 that someone refinished with a modern clear finish. It would look so much better with a London oil finish! I like this little gun. There are three or four very small dings in the barrels which we could remove but fore this price the gun is as is. | |||
|
Click anywhere on the large image below to zoom in, or use the
zooming slider below the image. |
Full Screen
|
|||
|
Boxlock No Damascus 27" 2 1/2" .042 extra full .014 recessed choke .025 .022
13 7/8" end of rubber pad; 12 7/8" end of wood
1 3/4" 3 1/4" 1/8" 6 lbs. 0 oz. No |
|||
|
